Accord 1984-85
1. Remove the temperature slider and fan control knobs.
2. Remove the dashboard cover.
3. Remove the top and bottom steering column brackets.
4. Remove the center console and radio.
5. Loosen the screws on the front of the dashboard, release the panel.
6. Disconnect the air mixer cable from the heater.
7. Disconnect the cable that controls the hot water supply from the valve.
8. Disconnect the switch wiring and remove the unit.
9. The control box can be disassembled into components after being removed.
For installation:
10. Reassemble the components if they are disassembled. Install the block.
11. Connect the switch wiring. Make sure the connection is correct.
12. Connect the cables that control the supply of water and air.
13. Fasten the screws securing the front panel.
14. Put the console and radio.
15. Install and secure the steering column.
16. Install the heater control panel cover, put the control knobs.