2. Remove the front wheels.
3. Disconnect the ends of the stabilizer from both lower suspension arms.
4. To remove bolts of fastening of arms of bushings of the stabilizer.
5. Remove stabilizer.
Examine the rubber bushings very carefully for cracks or deformations. Clean the inner and outer surfaces of the bushings before installing them. Faulty, dirty, or dented bushings can make strange noises under the vehicle, especially when cornering.
6. Installation is carried out in the reverse order. Make sure the bushings are correctly placed in the brackets. Tighten the brackets to 16 Nm and the connection bolts to 22 Nm.