1. Replace the carburetors. Make sure they are fully seated and tightened in the insulators. Install the insulator mounts.
2. Install the main fuel supply hose to the right side of the vacuum manifold.
3. Install the tank cleaning hose on the vacuum manifold.
4. Connect the tank vent hose.
5. Connect 3 cooling hoses to the thermal wax valve.
6. Connect the vacuum hoses to the vacuum manifold.
7. Install the throttle cable.
8. Connect the vacuum hoses to the carburetor.
9. Install the air cleaner base,
10. Install air shields and flanges.
11. Install two 10mm bolts under the air cleaner base.
12. Connect the connectors to the solenoid valve at the top of the air cleaner base.
13. Connect the vacuum hoses to the air cleaner base.
14. Attach the breather hose to the valve cover.
15. Install the air cleaner housing, filter element and cover. Connect vacuum hoses and air lines.