2. Disconnect the fuel shutoff solenoid valve and the air shutoff solenoid valve connectors. Remove the vacuum hose from the carburetor. Remove the two screws, and then remove the lower vacuum manifold.
3. Disconnect the fuel supply hoses from the carburetors and remove the two screws. Remove the fuel line.
4. Remove the 2 screws holding the air conditioning idle speed increase diaphragm. Remove the cotter pin and washer, remove the air conditioning idle speed increase diaphragm.
5. Remove the two screws and detach the lever by pulling out the cotter pin. Remove the throttle opener diaphragm.
6. Remove the cotter pin holding the thermowax valve lever; disconnect the lever.
7. Remove the two screws holding the adapter tube; pick up the phone.
8. Remove the 5 screws holding the front bracket; remove the bracket.
9. Disconnect the damper shaft spring. Remove the 4 screws and the rear bracket.
10. Separate the carburetors.
(Material obtained from the website hondabook.ru)