1. Disconnect wires from both plugs of the accumulator, since negative.
2. Disconnect cable from starter motor, tag and disconnect wires from starter solenoid. In certain engine/transmission combinations, an engine harness is available that is clamped to the starter. Remove the harness from the clamp and take it to the side.
3. Remove the starter motor by loosening the mounting bolts.
4. To install the starter, the steps are performed in reverse order. Tighten the mounting bolts to 45 Nm, securing the starter to the engine.
5. Connect the wiring to the starter securely. Connect the battery cables, positive first.