- a. Disconnect the pump return hose from the reservoir and place the end in a large container. Plug the channel in the tank.
- b. Start the engine and let it run at fast idle. Turn the steering wheel from lock to lock several times until fluid stops flowing from the hose. Stop the engine immediately; do not operate the pump without liquid.
- c. Attach hose.
2. Disconnect the pump inlet and outlet hoses. Remove the drive belt.
3. Remove bolts and pump.
4. Installation - in the reverse order. Adjust the belt tension, fill the reservoir and bleed the system.
Reminder: Use only Honda fluid for power steering gear. Any other fluid or ATF can damage the system.