1. Raise and secure the vehicle.
2. Remove the rear wheel.
3. Remove the caliper shield.
4. Disconnect the parking brake cable from the lever on the caliper by removing the locking pin.
5. Remove the banjo bolt and disconnect the brake hose from the caliper. Plug the hose immediately.
6. Remove the 2 caliper mounting bolts and remove the caliper from the bracket.
7. Installation is carried out in the reverse order. Use new shims on the banjo bolt and tighten to 35 Nm.
8. Tighten the caliper bracket bolts to 39 Nm.
9. Bleed the brake system. Adjust the parking brake if necessary.