1. Transfer case housing; 2. O-ring. Replace; 3. Roller bearing of the transfer case housing; 4. Transfer case shaft; 5. Outer ring of tapered roller bearing; 6. Tapered roller bearing; 7. Transfer case shaft sleeve; 8. Thrust gasket, 25 mm. Selected on site; 9. Transfer case drive gear (hypoid gear); 10. Conical spring washer. Replace; 11. Transfer case shaft lock nut, 22x1.25 mm.; Left hand thread. Replace; 12. Tapered roller bearing; 13. Outer ring of tapered roller bearing; 14. Thrust gasket, 68 mm. Selected on site; 15. O-ring, Replace; 16. Transfer case cover A; 17. Cover B of the transfer case; 18. O-ring. Replace; 19. Transfer case driven gear shaft (hypoid gear); 20. Thrust gasket, 35 mm. Selected on site; 21. Tapered roller bearing; 22. Transfer case bushing. Replace; 23. Outer ring of tapered roller bearing; 24. Outer ring of tapered roller bearing; 25. Tapered roller bearing; 26. Oil seal. Replace; 27. Connecting flange; 28. O-ring. Replace; 29. Protective ring; 30. Conical spring washer. Replace; 31. Transfer case driven gear shaft lock nut, 22x1.25 mm. Replace
Tightening torques
| Bolt/Nut No | Tightening torque | Size | Notes |
| 6A | 12 Nm (1.2 kgf/m) | 6x1.0 mm | |
| 8C | 24 Nm (2.4 kgf/m) | 8x1.25 mm | |
| 22L | 118 Nm (12.0 kgf/m) | 22x1.25 mm | Transfer Case Shaft Lock Nut: Left Hand Thread |
| 22N | 132-216 Nm (13.5-22.0 kgf/m) | 22x1.25 mm | Transfer case driven gear shaft lock nut tightening torque: depends on total starting torque |
(The original text of the article is located on the website: hondabook.ru)