1. Check the power steering fluid level (see above) and pump drive belt tension (see above).
2. Carefully disconnect the supply pipe from the pump nozzle so as not to spill the hydraulic fluid on the frame or other parts, then connect the hydraulic booster connector adapter (pump) to the pump nozzle.
1. POWER CONNECTOR ADAPTER (HOSE), 07RAK-S040120
2. FEED PIPE CONNECTION
3. 6x1.0 mm BOLT (special tool component)
4. 6mm NUT (special tool component), 11 Nm (1.1 kgf/m)
5. SHUT-OFF VALVE
6. 6x1.0 mm BOLT (special tool component), 11 Nm (1.1 kgf/m)
7. POWER CONNECTION ADAPTER (PUMP), 07RAK-S040110
8. POWER GAUGE, 07406-0010200
9. PRESSURE CONTROL VALVE
3. Connect the hydraulic booster connector (hose) to the hydraulic booster pressure gauge, then connect the supply pipe to the hydraulic booster connection adapter (hose).
4. Connect the hydraulic booster pressure gauge to the hydraulic booster connection adapter (pump).
5. Fully open shut-off valve.
1. SHUT-OFF VALVE
6. Fully open the pressure control valve.
7. Start the engine and let it run at idle speed.