Removal and installation the front anti-roll bar (Honda Accord 6)

1. Set the parking brake. Loosen the front wheel nuts. Jack up the front of the car and place it on supports. Remove the wheels.



2. Disconnect both struts from the anti-roll bar.



3. Unscrew the bolts securing the stabilizer bar clamps to the bottom of the vehicle.

4. Remove the anti-roll bar from under the vehicle.

5. Remove the mounting clamps from the rod and carefully inspect the rubber bushings for cracks, signs of hardening and aging of the material. Defective bushings are subject to replacement. Also check the rod posts for signs of weakening of the tent hinges and other mechanical damage. Replace defective components.

6. Installation is carried out in reverse order.

(Refer to the original source on the website «hondabook»)