Note:
- When disassembling, check the rubber parts for wear and damage.
- Make sure the new cotter pin is tight.
- Be careful not to damage the guide tube when removing the cables.
1. GEAR LEVER HANDLE, 8 Nm (0.8 kgf/m)
2. PIN. Replace
3. CLAMP
4. SPRING RINGS. Replace
5. 6x1.0 mm, 9.8 Nm (1.0 kgf/m)
6. GEAR CABLE
7. SPRING RINGS. Replace
8. PIN. Replace
9. STEEL WASHER
10. PLASTIC WASHER
11.GEARSHIFT CABLE
12. SILICONE GREASE
13. WASHER
14. SHIFT LEVER ASSEMBLY 15.8x1.25 mm, 13 Nm (1.3 kgf/m)
16. FLOATING BUSHING
17. RUBBER INSERT