2. Remove the wheel sensor wire from the steering knuckle and shock absorber. Do not disconnect the wheel sensor connector.
3. Separate the stabilizer bar from the lower arm (see above).
4. Remove the brake hose bracket from the shock absorber.
5. Loosen the shock absorber clamp bolt and remove the steering knuckle from the end of the shock absorber.
1. shock absorber tie bolt; 2. shock absorber; 3. steering knuckle; 4. flange bolt, 8x1.25mm; 5. wheel sensor wire; 6. 6mm flange bolt
6. Remove the shock absorber by unscrewing the three flange nuts.
1. flange nut, 10x1.25 mm; 2. shock absorber assembly