Warning! The models covered by this manual are equipped with a Supplemental Restraint System (SRS), commonly known as the airbag system, as standard equipment. Before performing any work in the area of the directional G-sensors, steering column or instrument panel, be sure to deactivate the SRS system to avoid accidental deployment of the airbags, which could result in serious injury (see Chapter On-board electrical equipment).
1. The models in question are equipped with two elements that filter the air pumped into the cabin by the air conditioning system. The filters are placed in a casing located near the air conditioning evaporator, on the right under the instrument panel.
2. Remove the glove box assembly (see Chapter Body).
3. Remove the three mounting screws and remove the glove box stiffener.
4. Release the lock located at the bottom and remove the A/C filter housing cover.
5. Remove the lower filter element from the casing first, then the upper one.
6. Remove the old filters from their holders and replace them with new ones.
7. Installation is carried out in reverse order.