Removal and installation
1. Remove the fuel pump.
2. Remove the fuel level indicator sensor, disconnect the connector, remove the pressure regulator and the fuel pump.
3. Installation is carried out in the reverse order of removal.
Note:
- When installing the fuel gauge sensor, make sure that its connector is securely fixed. Be careful not to damage its lever.
- Do not reinstall "F" O-rings.
Removal and installation the fuel filter (2WD).
A - fuel filter,
B - fuel level indicator sensor,
C - connector,
D - fuel pressure regulator,
E - fuel pump,
F - O-ring seal.
Removal and installation the fuel filter (4WD).
A - fuel filter,
B - fuel level indicator sensor,
C - connector,
D - fuel pressure regulator,
E - fuel pump,
F - O-ring seal.
Material obtained from the website: www.hondabook.ru