2. Remove the retainer (A) and disconnect the parking brake cable (C) from the caliper lever (B).
3. Loosen the bypass bolt (A) and disconnect the brake hose (B) from the caliper (C).
Note:
- Do not allow brake fluid to come into contact with painted surfaces. If fluid does come into contact with a painted surface, wipe it off immediately.
- To prevent brake fluid from leaking after disconnecting the hose, plug it.
4. Hold the guide pin (D) with a wrench and loosen the bolts. Remove the brake caliper.
5. Remove the guide pin (A), then remove the dust cover (B).
You will find the original on the portal HONDABOOK