1. Loosen the wheel nuts. Jack up the back of the car and place it on jack stands. Remove rear wheels.
2. Give nuts of fastening to a bar of the lower ends of its racks.
3. Also turn out bolts of collars of fastening of basic plugs of a bar to the bottom of the car. Remove the stabilizer bar.
4. Remove the collars from the bushings and inspect the latter for signs of hardening or aging of the rubber. Defective bushings must be replaced. Check up also reliability of landing of spherical hinges in racks of the stabilizer. Replace defective components.
5. Installation is carried out in the reverse order.