Replacing the transfer case drive gear bearing (Honda HR-V 1)

Note: Apply oil to all parts when assembling.

1. Using a special tool, press out the tapered roller bearing from the transfer case drive gear.

1. MANDREL HANDLE, 07749-0010000
2. PRESS
3. MARKET, 37x40 mm, 07746-0010200
4. TRANSFER CASE DRIVE GEAR
5. PIPE DISPLACEMENT, 0-4.5 inches (commercially available)
6. TAPERED ROLLER BEARING

2. Using the special tool, press the new tapered roller bearing into the transfer case pinion gear.

1. MANDREL HANDLE, 07749-0010000
2. PRESS
3. SPECIAL TOOL, eg 07947-SD90200
4. TRANSFER CASE DRIVE GEAR
5. TAPERED ROLLER BEARING
6. SPECIAL TOOLS, 40x50 mm, 07LAD-PW50601

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This information has been verified: Emil Safonov

◀ Previous

HR-V 1: Mechanical gearbox

Next ▶

Transfer case — disassembly
Transfer case — checking the elements
Transfer case — design description
Replacing oil seals
Differential — Tapered Roller Bearing Preload Adjustment

Replacing the Transfer Case Driven Gear Bearing
Disassembly and assembly of the transfer case shaft
Replacing the outer bearing ring of the transfer case cover A
Replacing the outer ring of the transfer case bearing
Transfer case — assembly