Note: When replacing parts marked with an asterisk (*), the tapered roller bearing preload must be adjusted.
1. THRUST GASKET. Adjustment (see below)
2. BEARING OUTER RING. Replacement (see below). Check for wear and damage
3. TAPERED ROLLER BEARING. Replacement (see below). Check for wear and damage
4. 10x1.0 mm, 103 Nm (10.5 kgf/m). Left-hand thread
5. DIFFERENTIAL CUP. Checking the clearance (see below). Checking for cracks
6. FINAL DRIVE GEAR. Replacement (see below). Check for wear and damage
7. TRANSFER CASE DRIVE GEAR. Replacement (see below). Check for wear and damage
8. TAPERED ROLLER BEARING Replacement (see below) Check for wear and damage
9. BEARING OUTER RING. Replacement (see below). Check for wear and damage
10. GASKET 75 mm
11. THRUST GASKET. Adjustment (see below)
12. BEARING OUTER RING. Replacement (see below). Check for wear and damage
13. TAPERED ROLLER BEARING. Replacement (see below). Check for wear and damage
14. DIFFERENTIAL CUP. Checking the clearance (see below). Checking for cracks
15. FINAL DRIVE GEAR. Replacement (see below). Check for wear and damage
16. 10x1.0 mm, 103 Nm (10.5 kgf/m). Left-hand thread
17. TAPERED ROLLER BEARING Replacement (see below) Check for wear and damage
18. BEARING OUTER RING. Replacement (see below). Check for wear and damage
19. GASKET 75 mm