1. Oil seal. Replace.; 2. Oil seal. Replace.; 3. Flywheel housing; 4. Reference pin, 12x20 mm; 5. Differential assembly; 6. Flywheel housing gasket. Replace.; 7. ATF fluid supply pipe assembly; 8. O-ring. Replace; 9. ATF pump drive chain; 10. Retaining ring; 11. Adjusting gasket, 22x28 mm. Selected on site; 12. ATF pump drive sprocket; 13. Pitot flange; 14. ATF pump sprocket hub; 15. Thrust washers; 16. Pitot tube bracket; 17. Pitot lubrication tube; 18. Pitot tube; 19. Reference pin, 10x16 mm; 20. ATF pump assembly; 21. O-ring. Replace; 22. Reference pin, 22x10 mm; 23. O-ring. Replace; 24. Reference pin, 18x10 mm; 25. ATF fluid feed tube holder assembly; 26. O-ring. Replace; 27. ATF fluid supply pipe of the starting clutch; 28. O-ring. Replace; 29. Feed tube flange; 30. Retaining ring; 31. Connector bracket; 32. O-ring. Replace; 33. Ball bearing; 34. Reference pin, 10x16 mm; 35. Mounting ring, 80 mm. Selected on site; 36. Retaining ring; 37. Cracker holder; 38. Crackers, 25.5 mm. Selected on site; 39. Starting clutch assembly; 40. Secondary shaft drive gear assembly; 41. O-ring. Replace; 42. Adjusting gasket, 25x35 mm. Selected on site; 43. Secondary shaft; 44. Parking brake latch shaft; 45. Parking brake latch spring; 46. Parking brake latch; 47. Lock washer. Replace; 48. Parking rod holder; 49. Ball bearing; 50. Vehicle Speed Sensor (VSS); 51. O-ring. Replace; 52. Oil seal. Replace.
Tightening torques
| Bolt/Nut No | Tightening torque | Size |
| 6A | 12 Nm (1.2 kgf/m) | 6x1.0 mm |
| 8A | 26 Nm (2.7 kgf/m) | 8x1.25 mm |
| 8B | 22 Nm (2.2 kgf/m) | 8x1.25 mm |
| 8D | 29 Nm (3.0 kgf/m) | 8x1.25 mm |
(Publication reprinted from the website HondaBook.ru)