2WD (LEFT)
1. 10x1.5 mm, BOLT, 98.0 Nm (10.0 kgf/m) Left-hand thread
2. FINAL DRIVE PINION. Check for excessive wear.
3. BALL BEARING
4. DIFFERENTIAL CUP
5. BALL BEARING
6. RETAINING RING, 80 mm. Selected on site
4WD (RIGHT):
1. TRANSFER CASE DRIVE GEAR. Check for excessive wear.
2. FINAL DRIVE PINION. Check for excessive wear.
3. BALL BEARING
4. DIFFERENTIAL CUP. Check for cracks.
5. BALL BEARING
6. 10x1.5 mm, BOLT, 98.0 Nm (10.0 kgf/m). Left-hand thread
7. RETAINING RING, 80 mm. Selected on site