Air direction switch knob
Rapid heating of the cabin
Prevention of fogging of glasses and warming up the cabin
Removing ice or fogging from the windshield or side windows
When the humidity is high, such as during rain
Rapid air cooling inside the cabin
Instruction. After the passenger compartment cools down quickly, switch to outside air intake. If the air circulates inside the cabin for a long time, the humidity will increase.
When the air conditioner is not used for a long time
During periods when the air conditioner is not used for a long time, to lubricate the compressor, it is necessary to periodically turn it on for several minutes.
Note:
- If air is taken from the passenger compartment for a long time, the windows fog up and visibility may be impaired. After warming up the passenger compartment, it is necessary to switch to the external air intake.
- When the heater is turned on, moisture is removed and the interior is warmed up.
- This mode is used in spring or autumn in rainy weather when the windows fog up. Moisture is removed from the air entering from outside, dry air is heated, which prevents the windows from fogging up.
Note:
- If air is supplied from the passenger compartment for a long time, then the windows will fog up due to the moist air exhaled by people in the passenger compartment. After drying the windows once, switch to outside air intake.
- When turning on the air conditioner button, do not set the temperature control knob near the leftmost position (maximum cold). Cold air enters the inner surface of the glass, which can fog up its outer surface and reduce visibility.
Instruction. At low temperatures in the cabin, the air conditioner sometimes does not turn on. In this case, warm up the passenger compartment by drawing air from the passenger compartment, and then turn on the air conditioner.