Withdrawal
1. Raise the rear of the vehicle and secure it securely. Remove the rear wheel.
2. Remove the shoulder bolt from the rear axle beam.
3. Loosen the 10mm self-locking nut and separate the stabilizer link from the body.
4. Gradually lower the floor jack.
5. Remove the spring and top spring seat.
6. Remove the collar nut from the rear axle beam and remove the shock absorber stop.
Installation
1. Install the limiter.
2. Install the spring and upper spring seat.
3. Attach the stabilizer link to the body.
4. Fit the shoulder bolt onto the rear axle beam.
5. Raise the rear axle carrier with a floor jack until the vehicle is slightly above the safety bars.
6. Tighten the self-locking nut.
7. Tighten the shoulder bolt.
8. Install the rear wheel.