2. Install the strut support, washer and tighten the nut.
3. Install new lower strut mounting bolts, bracket and tighten new nuts.
Note: When installing, align the bracket pin with the hole in the rack.
4. Install the speed sensor retainer.
A - mounting hole,
B - pin,
C - brake hose bracket,
D - retainer.
5. Lower the front of the car with a garage jack, loading the front suspension.
6. Tighten the lower strut mounting nuts to the specified torque, securing the bolts with a wrench.
7. Install the stabilizer bar onto the strut and tighten the fastener to the specified tightening torque.
8. Secure the shock absorber rod from turning and tighten the nut to the specified tightening torque.
9. Install the plug.
10. Install the wheels.
11. Check and, if necessary, adjust the front wheel alignment angles.