Models equipped with climate control system
The current time is displayed on the clock assembly display only when the ignition is on.
Setting the time is done as follows:
- a) Turn on the ignition - the display should show the hours and minutes;
- b) Press and hold the HOUR button until the first two digits of the indicator take the correct value corresponding to the number of hours of the current time;
- c) Press and hold the MIN (Minutes) button until the last two digits on the display show the correct value, corresponding to the number of minutes of the current time.
Models not equipped with climate control
The digital clock shows the current time only when the ignition is on.
Setting the time is done as follows:
- a) Turn on the ignition - the display should show the hours and minutes;
- b) Press and hold the H (Hours) button until the first two digits of the indicator take the correct value corresponding to the number of hours of the current time;
- c) Press and hold the M (Minutes) button until the last two digits on the display show the correct value corresponding to the number of minutes of the current time.
The R button is used to quickly adjust the clock readings based on the exact time signals. If no more than 30 minutes have passed since the beginning of the current hour, the clock is set to the time corresponding to the beginning of the previous hour. If no more than 30 minutes have passed since the beginning of the current hour, the clock is set to the time corresponding to the beginning of the next hour. For example:
Initial clock reading
- 1:06 1:00
- 1:52 2:00
(The original is located on the website «HondaBook.ru»)