2. Disconnect the starter cable from terminal B on the solenoid, then disconnect the BLACK/WHITE wire from terminal S.
1. 10x1.25 mm, 44 Nm (4.5 kgf/m); 2. 10 x 1.25 mm, 44 Nm (4.5 kgf/m); 3. Black and white wire; 4. Fastening nut of terminal B, 9 Nm (0.9 kgf/m); 5. Starter cable
3. Remove the two bolts securing the starter, then remove the starter.
4. Installation is the reverse of removal. When connecting the starter cable, make sure the crimped side of the cable lug faces outward.
1. Crimp side of cable lug; 2. Nut; 3. Terminal
5. Connect the positive and negative cables to the battery.
(Full text available on the portal: «www.HondaBook.ru»)