Rear seat belts (Honda Fit 1)

1. Remove the rear seat belt lower mounting bolt (A).

• Tightening torque - 32 Nm

2. Remove the side trim of the luggage compartment (see section "Interior trim").

3. Remove the cover (A) of the seat belt upper anchor bolt (B) as shown in the figure, and loosen the bolt.

• Tightening torque - 32 Nm

4. Remove the screw (A) and bolt (B) securing the seat belt pretensioner (D) (C), then remove the seat belt and pretensioner.

Tightening torque:

• screw - 4 Nm
• bolt - 32 Nm

5. Installation is carried out in the reverse order of removal.