Removal and installation the rear seat cushion retainer (Honda Fit 1)

1. Loosen the screw (A) and remove the cover (B) of the retainer.



2. Loosen the screws (A), disconnect the pins (B), and remove the cover (C) of the rear seat bracket hole.



3. Remove the bolts (A), disconnect the rod (B), then disconnect the retainer (D) from the rear seatback frame (C).

• Tightening torque - 22 Nm

4. Remove the pins (C) of the lock lever (B) from the frame (A), then remove the lever and rod (D).



[The original text of the article is located on the website: hondabook]