A) For adjusting the vertical and horizontal position of the door (WITH) loosen the bolts (IN) hinge attachment (D) doors as picture shown "Rear door adjustment".
b) Tighten the bolts after adjustment.
- Tightening torque - 22 Nm
V) Adjust the height of the door protrusion relative to the body by turning the cushions (E), as it shown on the picture "Rear door adjustment".
2. If necessary, adjust the position of the door lock bracket.
A) Loosen the screws (A) fasteners x shackles (F) door lock.
b) Adjust the position of the bracket by tapping it with a plastic mallet as shown in the figure "Rear door adjustment".
V) Tighten screws after adjustment.
- Tightening torque - 22 Nm
G) Apply grease to the door hinge (A), as it shown on the picture.