Note: Assembly is carried out in the reverse order of disassembly, taking into account the following:
Align the alignment mark (WITH) on the door (A) labeled (E) on a loop (IN) hatch by turning the door counterclockwise from matching the label on the door with the label (D).
1. Open the access door.
2. Install three 4x12mm screws (A) into the holes of the hinge (IN) hatch until they rest against the stops (WITH).
3. Next tighten the screws until the clips come off (WITH) doors (A), and remove the door from the hinge (IN).
4. Loosen the screws (D).