a) To adjust the vertical and horizontal position of the door, loosen the bolts (C and D) securing the door hinge as shown in the figure.
Note: Place a jack (A) under the open door, placing a towel or other cloth (B) on it first to avoid damaging the painted surfaces of the door.
b) Tighten the bolts after adjustment.
- Tightening torque - 29 Nm
c) Adjust the door protrusion height relative to the body by turning the cushions (A) as shown in the figure.
2. If necessary, adjust the position of the door lock bracket.
a) Loosen the screws (B) securing the door lock bracket (A).
b) Adjust the position of the bracket by tapping it with a plastic hammer (C).
c) Tighten the screws after adjustment.
- Tightening torque - 18 Nm
(Article source on the website: hondabook)