Caution: Make sure that the clamp fastening does not touch adjacent components.
2. Secure the oil cooler hose clamps to the strut.
3. Secure the clamp to the section of the oil cooler hose marked in yellow.
Automatic transmission oil cooler hoses — installation (Honda Avancier 1)
1. Place the automatic transmission oil cooler hoses on the tubes and secure with clamps as shown in the figure.
2. Secure the oil cooler hose clamps to the strut.
3. Secure the clamp to the section of the oil cooler hose marked in yellow.
2. Secure the oil cooler hose clamps to the strut.
3. Secure the clamp to the section of the oil cooler hose marked in yellow.
This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
This information has been verified: Emil Safonov
Link in different formats to this article
Comments and feedback from visitors
No comments yet
- General information
- Controls and instruments
- User manual
- Power unit
- Engine maintenance
- Engine repair
- Cooling system
- Engine management
- Power and exhaust system
- Transmission
- Automatic gearbox
- Drive shafts and differential
- Chassis and running gear
- Steering
- Car suspension
- Brake system
- Body and interior
- Doors, locks and windows
- Interior (internal elements)
- Exterior (external elements)
- Air conditioner
- Electrical equipment
- Power devices
- Equipment and devices
- Headlights and lighting
- Electrical circuits