2. Apply automatic transmission oil to the driven gear and the mounting surfaces of the transfer case and automatic transmission. Install the transfer case on the automatic transmission.
Caution: Avoid exposure to foreign particles.
3. Connect the propeller shaft to the transfer case.
During installation, align the marks.
4. Install the lever onto the steering shaft, install the shift shaft and lock the lock washer.
Do not bend the cable too much during installation.
5. Tighten the rack bolts and install the cable cover.
6. Install the exhaust pipe A, connect the oxygen sensor connector.
7. Install the mudguard.
8. Top up the automatic transmission oil, see above.
9. Start and warm up the engine and check the automatic transmission oil level.