Attention:
- Replace unused components.
- Flush the removed components with brake fluid and blow out all ports with compressed air.
- Keep foreign matter away from removed components.
1. Remove the master cylinder.
2. Remove the stem seal from the brake booster.
3. Push in the secondary piston and remove the circlip.
4. Remove the tank.
5. Push in the secondary piston and remove the lock pin.
6. Remove the secondary and primary pistons from the master cylinder.
7. Remove the lid and filter from the reservoir.
8. Remove the reservoir seal from the lid.
9. Remove the reservoir and rubber bushings from the master cylinder.
After separating the reservoir from the master cylinder, be sure to replace the rubber bushings with new ones.