2. Drain the engine oil.
3. Replace drain plug with new washer and fill with recommended oil.
Oil Requirements
Always use fuel-saving oil labeled on the packaging «API Service SG, SH or SJ».
SAE Viscosity: See table below.
Filling capacity
Models for Europe, Australia and South Africa:
- 3.0 liters when changing oil without filter.
- 3.3 liters when changing oil with filter.
- 3.7 liters after engine repair.
Excluding Europe, Australia and South Africa models:
- 3.3 liters when changing oil without filter.
- 3.6 liters when changing oil with filter.
- 4.3 l after engine repair.
Replacement interval
Models for Europe:
- Every 15,000 km or 12 months (under normal operating conditions)
- Every 7,500 km or 6 months (under severe operating conditions)
Australia Models:
- Every 10,000 km or 12 months (under normal operating conditions)
- Every 5,000 km or 6 months (under severe operating conditions)
Excluding Europe and Australia models:
- Every 7,500 km or 6 months
Engine oil viscosity according to the SAE scale for various ambient temperature ranges:
4. Fill the engine with oil to the correct level, start the engine and let it run for more than three minutes, then check for leakage and oil level.