1. 6x1.0 mm, 9.8 Nm (1.0 kgf/m)
2. HEAT SHIELD
3. EXHAUST PIPE B
4. SILENCER
5. GASKET. Replace.
6. SELF-LOCKING NUT, 10x1.25 mm, 54 Nm (5.5 kgf/m). Replace.
7. EXHAUST GAS TEMPERATURE (EGT) SENSOR (except KU models)
8. SECONDARY HEATED OXYGEN SENSOR (HO2S) (except KU models) 44 Nm (4.5 kgf/m)
9. GASKET. Replace.
10. THREE-WAY CATALYTIC CONVERTER (TWC) (D16W1 engine)
11. 8x1.25 mm, 22 Nm (2.2 kgf/m). Replace. Tighten the bolts crosswise in several passes.
12. GASKET. Replace.
13. EXHAUST CHAMBER (engine D16W2)
14. SELF-LOCKING NUT, 8x1.25 mm, 16 Nm (1.6 kgf/m). Replace.
15. SELF-LOCKING NUT, 10x1.25 mm, 54 Nm (5.5 kgf/m). Replace.
16. EXHAUST PIPE A
17. GASKET. Replace.
18. SELF-LOCKING NUT, 10x1.25 mm, 33 Nm (3.4 kgf/m). Replace.
Note: When assembling, use new gaskets and self-locking nuts.