1. Disconnect the negative and positive cables from the battery.
2. Remove the lower pocket on the driver's side (see Ch. "Body").
3. Disconnect the 7-pin connector from the under-dash fuse/relay box.
Female connector on the harness side:
1. 7-pin connector; 2. blue and white; 3. white; 4. blue and white; 5. black and white; 6. yellow; 7. black and yellow; 8. black and white
4. Check for conductivity between the contacts in each switch position according to the table.
5. If the continuity test is not consistent with the table, replace the steering column lock assembly.
(Based on materials from the website: «HondaBook.ru»)