Contents: Backrest cover ⇊ Seat cushion cover ⇊
Note:
- Do not tear the seams or damage the seat covers.
- Wear protective gloves.
Backrest cover
1. Fold the backrest forward.
2. Unhook the hook.
3. Fold back the back cover, then unhook all the internal springs.
4. Remove the headrest guide, then remove the backrest cover from the cushion.
5. Installation is carried out in the reverse order of removal, taking into account the following:
- To avoid creases when applying the cover to the seat back, make sure the material is evenly distributed over the padding before hooking the hooks and inner springs.
- Securely connect the seat heater connector and route the seat heater harness correctly (on heated seats).
Seat cushion cover
1. Remove the front seat (see above).
2. Remove the seat cushion (see above).
3. Unhook the clips from under the seat cushion, then loosen the seat cushion cover.
4. Fold back the edge of the seat cushion cover around the entire perimeter and unhook the clips, then remove the seat cushion cover.
5. Installation is carried out in the reverse order of removal, taking into account the following:
- To avoid wrinkles when applying the cover to the seat cushion, make sure the material is evenly distributed over the padding before securing the clips, hooks and inner springs.
- Replace the removed clamps with new ones using upholstery crimping pliers (available commercially).
