Driver's seat
Note:
- Do not scratch the body or tear the seat covers.
- When prying out components with a flat-blade screwdriver, wrap it with protective tape to prevent damage.
1. HEADREST
2. Forward
3. HOOK
4. SEAT CUSHION
5. 10x1.25 mm, 47 Nm (4.8 kgf/m)
6. TILT COVER
7. TILT LEVER
8. TILT ADJUSTER/OUTER SEAT GUIDE
9. CONNECTING WIRE
10. INTERNAL SEAT GUIDE
11. CENTRAL COVER
12. END PLUG
13. BUSHING
14. END PLUGS
15. CLAMP
16. AXLE NUT, 8x1.25 mm, 22 Nm (2.2 kgf/m)
17. AXLE WASHER
18. SEAT BACK
Passenger seat
1. HEADREST
2. Forward
3. HOOK
4. AXLE NUT, 8x1.25 mm, 22 Nm (2.2 kgf/m)
5. AXLE WASHER
6. SEAT CUSHION
7. CLAMP
8. CENTRAL COVER
9. 10x1.25 mm, 47 Nm (4.8 kgf/m)
10. INTERNAL SEAT GUIDE
11. TILT CABLE
12. TILT ADJUSTER/OUTER SEAT GUIDE
13. TILT COVER
14. TILT LEVER
15. END PLUGS
16. CONNECTING WIRE
17. END PLUG
18. BUSHING
19. SEAT COVER
20. SEAT BACK
Assembly is carried out in the reverse order of disassembly, taking into account the following:
- Make sure the axle bushing and washer are properly installed.
- Connect the connecting wire by twisting it 90°.
- Replace the back cover clips with new ones.
- To avoid creases when putting the cover on the back of the seat, make sure that the material is evenly distributed over the padding.
- Apply multipurpose grease to the moving sections of the seat rails.