Note:
- Don't scratch the mirror.
- When removing and installing the mirror holder, wear protective gloves.
1. Gently pull the lower edge of the mirror holder by hand. If necessary, disconnect the heater connector.
1. mirror; 2. hooks; 3. glue; 4. mirror holder; 5. clamps; 6. drive
2. Separate the mirror holder from the drive by slowly moving them apart
3. Reattach the mirror holder hooks to the drive, then install the mirror holder onto the drive. Gently press the clip sections of the mirror holder until the holder locks into place.
4. Check the operation of the drive.