Replacing the main hatch seal (Honda HR-V 1)

1. Remove the glass (see above).

2. Remove the main seal from the body.



3. Clean the contact surface on the body with a sponge soaked in alcohol. After cleaning, do not allow oil, grease or water to get on the body surface.

4. Apply sealant (CEMEDINE CS33061) to the main seal.



5. Install the main seal as shown in the figure.



6. Scrape off or wipe off excess sealant with a spatula or napkin.

7. Leave for three hours.

8. Install the glass.

9. Check for water leaks. Do not apply high pressure water.