2. Install the rear suspension beam on a jack and raise it until the suspension begins to compress.
3. Disconnect the lower part of shock absorbers.
A - rear suspension beam,
B - shock absorber.
1 - nut,
2 - washer,
3 - pillow,
4 - shock absorber assembly.
4. Remove the cover from the trunk trim.
5. Unscrew the nut, securing the shock absorber rod from rotation, and remove the washer and the shock absorber upper support.
A - puck
B - pillow
C - hexagon,
D - shock absorber rod.
6. Remove shock absorber.