2. Install the rear suspension beam on a jack and raise it until the suspension begins to compress.
3. Turn out bolts of fastening of back shock-absorbers to a beam of a back suspension bracket.
A - rear suspension beam,
B - shock absorber.
4. Lower the jack with the rear suspension beam, remove the springs and upper valve seats.
A - spring,
B - upper seat of the spring.
6. Install the top spring seat.
Note.
- Install the end of the top coil of the spring into the groove of the top spring seat.
- Place the end of the upper coil of the spring against the stop of the upper spring seat.
A - spring,
B - upper spring seat,
C - emphasis,
D - end of the upper coil of the spring.
6. Lower a beam of a back suspension bracket and establish a spring between a body and a beam. Make sure that the end of the lower coil of the spring rests against the stop of the lower spring seat.
7. Install the rear suspension beam on the jack and raise it until the suspension begins to compress.
8. Connect shock absorbers.