Front glass.
1 - upper piston,
2 - piston,
3 - glass seal,
4 - lower piston,
5 - front glass,
6 - glass finishing.
1. Remove the front pillar trim (see section "Interior trim").
2. Using a knife (A), cut off the layer of glue (B) along the entire perimeter of the glass, as shown in the figure.
Caution: To avoid damaging your hands on sharp edges, wear gloves.
3. From the outside of the vehicle, detach the clips (B, C and E) and carefully remove the glass (A) and trim (D).
