Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. The heater fan assembly is located under the dashboard of the car, behind the glove box, near the bulkhead of the engine compartment. The assembly includes a drive electric motor, a resistor assembly and a motor for switching on the closed circulation mode.
3. Disconnect the drive motor wiring connector and remove the three mounting screws. Remove the motor.
4. If the motor is to be replaced, disconnect it from the fan impeller - use needle nose pliers to release and remove the lock. Rearrange the impeller to assemble a new electric motor.
5. Installation is carried out in the reverse order. Check the fan for proper operation.