| Suspension type | |
| Front | 2-lever |
| Back | Independent, 5-link |
| Steering type | Rack and pinion mechanism with hydraulic booster |
| Hydraulic fluid type PAS | See Chapter Settings and ongoing maintenance |
| Wheel alignment angles | |
| Wheel alignment, mm | |
| Front wheels | 0 |
| Rear wheels | 20 |
| Wheel alignment | |
| Front wheels | |
| Models 1.6, 1.8 (except KY) and 2.0 l | 0° 00' |
| Models 1.8L KY | 0° 08' |
| 2.2L models | - 0° 15' |
| Rear wheels | |
| Models 1.6, 1.8 (except KY) and 2.0 l | - 1° 00' |
| Models 1.8L KY | - 0° 49' |
| 2.2L models | - 1° 15' |
| Caster angle (front wheels) | |
| Models 1.6, 1.8 (except KY) and 2.0 l | 2° 50' |
| Models 1.8L KY | 2° 44' |
| 2.2L models | 2° 59' |
| Tightening forces of threaded connections | Nm |
| Front suspension | |
| Damper fork pinch bolt | 43 |
| Nut of the through bolt securing the damper fork to the lower control arm of the suspension | 64 |
| Lower Control Arm Inner Pivot Bolt | 64 |
| Nut for fastening the push rod to the cross beam | 43 |
| Push rod to lower control arm mounting bolts | 161 |
| Shock absorber mounting nuts to the body | |
| 8 x 1.25 | 16.3 |
| 10 x 1.25 | 50 |
| Damper rod nut | 30 |
| Anti-roll bar strut mounting nut | 39 |
| Anti-roll bar mounting clamp bolts | 30 |
| Lower ball joint nut | 49÷58 |
| Upper ball joint nut | 39÷47 |
| Wheel speed sensor support bracket nut | 9.5 |
| Rear suspension | |
| Lower control arm inner pivot bolt | 58 |
| Lower arm to hub assembly mounting bolt nut | 58 |
| Inner axle bolt nut of control arm of suspension | 54 |
| Control arm to hub assembly mounting nut | 58 |
| Bolt securing the trailing arm to the chassis | 58 |
| Front trailing arm to hub assembly mounting bolt | 58 |
| Rear trailing arm inner pivot bolt | 58 |
| Rear trailing arm to hub assembly mounting bolt | 58 |
| Upper control arm inner pivot bolt | 58 |
| Upper arm to hub assembly castle nut | 49÷58 |
| Hub nut | 188 |
| Damper rod nut | 30 |
| Anti-roll bar strut mounting nut | 39 |
| Anti-roll bar mounting clamp bolts | 30 |
| Bolt for fastening the shock absorber to the hub assembly | 58 |
| Upper shock absorber mounting nuts | 50 |
| Airbag | |
| Airbag module mounting bolts (TORX heads) | 9.7 |
| Steering | |
| Steering column intermediate shaft pinch bolt | 22 |
| Steering pump mounting bolts | 22 |
| PAS hydraulic line bolts | 10.8 |
| Steering wheel mounting nut | 39 |
| Rack and pinion assembly mounting bolts | 38 |
| Reinforcement plate fastener | |
| Small bolts | 38 |
| Big bolts | 43 |
| Steering tie rod end to steering knuckle mounting nut | 43 |
Article source on the website www.hondabook.ru