To turn off the system, press the "CANCEL" switch or press the brake pedal. You can also turn off the system by pressing the "CRUISE" switch on the OFF side.
Automatic shutdown of the IHCC system
In the following cases, the system turns off automatically and the buzzer sounds.
In such cases, the "CRUISE CONTROL" operation indicator flashes and at the same time the "OFF" indicator flashes on the display for 5 seconds.
1. When you turn on the windshield wiper in the "H!" or "MIST" mode.
2. In bad weather (rain, fog, snow).
3. When the laser photodetector is dirty.
4. When wheels slip or when wheels of different sizes are used.
5. In case of system failure.
6. When sunlight hits the laser photodetector.
7. During long drives on mountain roads.
Install all wheels on the vehicle with unworn tires of the same installed size, type and tread pattern, otherwise the IHCC system will not operate properly.
Return to the mode set before the system was turned off
If the vehicle speed is displayed on the display after the system is turned off, briefly press the "RES/ACCEL" switch. In this case, the vehicle speed will become equal to the speed set before the system was turned off, and the vehicle will move at a constant speed.
If the display does not show the vehicle speed, it is not possible to return to the previous mode. In this case, set the speed again by pressing the "SET/DESEL" switch.