Checking the power steering on a stationary vehicle (Honda Avancier 1)

1. Check the power steering fluid level and pump belt tension.

2. Start the engine and leave it at idle speed.

3. Warm up the oil by turning the steering wheel left and right several times.

Oil temperature during measurement: 45±5°C

4. Park the car on a normal concrete surface.

Attention. The surface on which the measurement is performed must have good adhesion to the vehicle wheels (must not be contaminated with oils, water, etc.).

5. Attach the dynamometer to the steering wheel, pull the dynamometer in the tangent direction and take a reading when the steering wheel turns 90° relative to the position corresponding to the vehicle moving in a straight line.