Water Pump — Checking and Replacing (Honda HR-V 1)

Examination

1. Remove the timing belt.

2. Make sure the water pump rotates counterclockwise.

3. Check for signs of leakage through the seal.

Note: A slight leak from the bleed nipple is considered normal.

Replacement

1. Remove the timing belt.

2. Remove the water pump by unscrewing five bolts.

Note: Check, repair and clean the O-ring groove and the contact surface with the cylinder block.

3. Install the water pump in the reverse order of removal.

Note:

• Hold the O-ring when installing.
• Wipe up any spilled engine coolant.

[Article source on the website: hondabook.ru]