Note: Installation is carried out in the reverse order of removal.
1. Disconnect the connectors.
Left-hand drive models.
1 - wire retainer from the coupling winding,
2 - connector of the clutch winding wire,
3 - thermal fuse.
Right hand drive models.
1 - clutch winding wire retainer;
2 - thermal fuse.
2. Replace the faulty thermal fuse with a good one and apply thermal paste (0.15g) to its contact surface as shown in the figure.
1 - thermal paste,
2 - thermal fuse.
The article was taken from the website: HONDABOOK