General parameters
| Coolant volume | See Chapter Settings and ongoing maintenance |
| Drive belt tension force | See Chapter Settings and ongoing maintenance and Controls and operating techniques |
| Calculated pressure of the radiator cap, kgf/cm² | 0.1÷1.3 |
| Temperature of full opening of thermostat, °C | 91 |
| Tightening forces of threaded connections | Nm |
| Thermostat Housing Cover Bolts | 11.8 |
| Water pump to block mounting bolts | 11.8 |
Location of components of the cooling, heating and air conditioning systems in the engine compartment of a car (V6 engine shown, for 4-cylinder models the layout of components is similar)
1 - Radiator; 2 - Capacitor; 3 - Fans for cooling and air conditioning systems; 4 - Water pump; 5 - Thermostat; 6 - Expansion tank
Thermostat Components
1 - Flange; 2 - Piston; 3 - Bleed valve; 4 - Main coil spring; 5 - Secondary coil spring; 6 - Frame; 7 - Main valve; 8 - Valve seat
(The article was copied from the website «www.HondaBook.ru»)